Incremental loading

Incremental loading is the act of loading only new or changed data and not old records that we have already loaded. It enables low-latency and low-cost data transfer.

The challenge of incremental pipelines is that if we do not keep track of the state of the load (i.e., which increments were loaded and which are to be loaded), we may encounter issues. Read more about state here.

Choosing a write disposition

The 3 write dispositions:

• Full load: replaces the destination dataset with whatever the source produced on this run. To achieve this, use write_disposition='replace' in your resources. Learn more in the full loading docs.

• Append: appends the new data to the destination. Use write_disposition='append'.

• Merge: Merges new data into the destination using merge_key and/or deduplicates/upserts new data using primary_key. Use write_disposition='merge'.

Two simple questions determine the write disposition you use

The "write disposition" you choose depends on the dataset and how you can extract it.

To find the "write disposition" you should use, the first question you should ask yourself is "Is my data stateful or stateless"? Stateful data has a state that is subject to change - for example, a user's profile. Stateless data cannot change - for example, a recorded event, such as a page view.

Because stateless data does not need to be updated, we can just append it.

For stateful data, comes a second question - Can I extract it incrementally from the source? If yes, you should use slowly changing dimensions (Type-2), which allow you to maintain historical records of data changes over time.

If not, then we need to replace the entire dataset. However, if we can request the data incrementally, such as "all users added or modified since yesterday," then we can simply apply changes to our existing dataset with the merge write disposition.

Merge incremental loading

The merge write disposition can be used with three different strategies:

1. delete-insert (default strategy)
2. scd2
3. upsert

delete-insert strategy

The default delete-insert strategy is used in two scenarios:

1. You want to keep only one instance of a certain record, i.e., you receive updates of the user state from an API and want to keep just one record per user_id.
2. You receive data in daily batches, and you want to make sure that you always keep just a single instance of a record for each batch, even in case you load an old batch or load the current batch several times a day (i.e., to receive "live" updates).

The delete-insert strategy loads data to a staging dataset, deduplicates the staging data if a primary_key is provided, deletes the data from the destination using merge_key and primary_key, and then inserts the new records. All of this happens in a single atomic transaction for a root and all nested tables.

Example below loads all the GitHub events and updates them in the destination using "id" as the primary key, making sure that only a single copy of the event is present in the github_repo_events table:

@dlt.resource(primary_key="id", write_disposition="merge")
def github_repo_events():
    yield from _get_event_pages()

You can use compound primary keys:

@dlt.resource(primary_key=("id", "url"), write_disposition="merge")
def resource():
    ...

By default, primary_key deduplication is arbitrary. You can pass the dedup_sort column hint with a value of desc or asc to influence which record remains after deduplication. Using desc, the records sharing the same primary_key are sorted in descending order before deduplication, making sure the record with the highest value for the column with the dedup_sort hint remains. asc has the opposite behavior.

@dlt.resource(
    primary_key="id",
    write_disposition="merge",
    columns={"created_at": {"dedup_sort": "desc"}}  # select "latest" record
)
def resource():
    ...

Example below merges on a column batch_day that holds the day for which the given record is valid. Merge keys also can be compound:

@dlt.resource(merge_key="batch_day", write_disposition="merge")
def get_daily_batch(day):
    yield _get_batch_from_bucket(day)

As with any other write disposition, you can use it to load data ad hoc. Below we load issues with top reactions for the duckdb repo. The lists have, obviously, many overlapping issues, but we want to keep just one instance of each.

p = dlt.pipeline(destination="bigquery", dataset_name="github")
issues = []
reactions = ["%2B1", "-1", "smile", "tada", "thinking_face", "heart", "rocket", "eyes"]
for reaction in reactions:
    for page_no in range(1, 3):
      page = requests.get(f"https://api.github.com/repos/{repo}/issues?state=all&sort=reactions-{reaction}&per_page=100&page={page_no}", headers=headers)
      print(f"got page for {reaction} page {page_no}, requests left", page.headers["x-ratelimit-remaining"])
      issues.extend(page.json())
p.run(issues, write_disposition="merge", primary_key="id", table_name="issues")

Example below dispatches GitHub events to several tables by event type, keeps one copy of each event by "id" and skips loading of past records using "last value" incremental. As you can see, all of this we can just declare in our resource.

@dlt.resource(primary_key="id", write_disposition="merge", table_name=lambda i: i['type'])
def github_repo_events(last_created_at = dlt.sources.incremental("created_at", "1970-01-01T00:00:00Z")):
    """A resource taking a stream of github events and dispatching them to tables named by event type. Deduplicates by 'id'. Loads incrementally by 'created_at' """
    yield from _get_rest_pages("events")

note

If you use the merge write disposition, but do not specify merge or primary keys, merge will fallback to append. The appended data will be inserted from a staging table in one transaction for most destinations in this case.

Delete records

The hard_delete column hint can be used to delete records from the destination dataset. The behavior of the delete mechanism depends on the data type of the column marked with the hint: 1) bool type: only True leads to a delete—None and False values are disregarded. 2) Other types: each not None value leads to a delete.

Each record in the destination table with the same primary_key or merge_key as a record in the source dataset that's marked as a delete will be deleted.

Deletes are propagated to any nested table that might exist. For each record that gets deleted in the root table, all corresponding records in the nested table(s) will also be deleted. Records in parent and nested tables are linked through the root key that is explained in the next section.

Example: with primary key and boolean delete column

@dlt.resource(
    primary_key="id",
    write_disposition="merge",
    columns={"deleted_flag": {"hard_delete": True}}
)
def resource():
    # This will insert a record (assuming a record with id = 1 does not yet exist).
    yield {"id": 1, "val": "foo", "deleted_flag": False}

    # This will update the record.
    yield {"id": 1, "val": "bar", "deleted_flag": None}

    # This will delete the record.
    yield {"id": 1, "val": "foo", "deleted_flag": True}

    # Similarly, this would have also deleted the record.
    # Only the key and the column marked with the "hard_delete" hint suffice to delete records.
    yield {"id": 1, "deleted_flag": True}
...

Example: with merge key and non-boolean delete column

@dlt.resource(
    merge_key="id",
    write_disposition="merge",
    columns={"deleted_at_ts": {"hard_delete": True}})
def resource():
    # This will insert two records.
    yield [
        {"id": 1, "val": "foo", "deleted_at_ts": None},
        {"id": 1, "val": "bar", "deleted_at_ts": None}
    ]

    # This will delete two records.
    yield {"id": 1, "val": "foo", "deleted_at_ts": "2024-02-22T12:34:56Z"}
...

Example: with primary key and "dedup_sort" hint

@dlt.resource(
    primary_key="id",
    write_disposition="merge",
    columns={"deleted_flag": {"hard_delete": True}, "lsn": {"dedup_sort": "desc"}})
def resource():
    # This will insert one record (the one with lsn = 3).
    yield [
        {"id": 1, "val": "foo", "lsn": 1, "deleted_flag": None},
        {"id": 1, "val": "baz", "lsn": 3, "deleted_flag": None},
        {"id": 1, "val": "bar", "lsn": 2, "deleted_flag": True}
    ]

    # This will insert nothing, because the "latest" record is a delete.
    yield [
        {"id": 2, "val": "foo", "lsn": 1, "deleted_flag": False},
        {"id": 2, "lsn": 2, "deleted_flag": True}
    ]
...

note

Indexing is important for doing lookups by column value, especially for merge writes, to ensure acceptable performance in some destinations.

Forcing root key propagation

Merge write disposition requires that the _dlt_id (row_key) of the root table be propagated to nested tables. This concept is similar to a foreign key but always references the root (top level) table, skipping any intermediate parents. We call it root key. The root key is automatically propagated for all tables that have the merge write disposition set. We do not enable it everywhere because it takes up storage space. Nevertheless, in some cases, you may want to permanently enable root key propagation.

pipeline = dlt.pipeline(
    pipeline_name='facebook_insights',
    destination='duckdb',
    dataset_name='facebook_insights_data',
    dev_mode=True
)
fb_ads = facebook_ads_source()
# enable root key propagation on a source that is not a merge one by default.
# this is not required if you always use merge but below we start with replace
fb_ads.root_key = True
# load only disapproved ads
fb_ads.ads.bind(states=("DISAPPROVED", ))
info = pipeline.run(fb_ads.with_resources("ads"), write_disposition="replace")
# merge the paused ads. the disapproved ads stay there!
fb_ads = facebook_ads_source()
fb_ads.ads.bind(states=("PAUSED", ))
info = pipeline.run(fb_ads.with_resources("ads"), write_disposition="merge")

In the example above, we enforce the root key propagation with fb_ads.root_key = True. This ensures that the correct data is propagated on the initial replace load so the future merge load can be executed. You can achieve the same in the decorator @dlt.source(root_key=True).

scd2 strategy

dlt can create Slowly Changing Dimension Type 2 (SCD2) destination tables for dimension tables that change in the source. By default, the resource is expected to provide a full extract of the source table each run, but incremental extracts are also possible. A row hash is stored in _dlt_id and used as surrogate key to identify source records that have been inserted, updated, or deleted. A NULL value is used by default to indicate an active record, but it's possible to use a configurable high timestamp (e.g. 9999-12-31 00:00:00.000000) instead.

note

The unique hint for _dlt_id in the root table is set to false when using scd2. This differs from default behavior. The reason is that the surrogate key stored in _dlt_id contains duplicates after an insert-delete-reinsert pattern:

1. A record with surrogate key X is inserted in a load at t1.
2. The record with surrogate key X is deleted in a later load at t2.
3. The record with surrogate key X is reinserted in an even later load at t3.

After this pattern, the scd2 table in the destination has two records for surrogate key X: one for the validity window [t1, t2], and one for [t3, NULL]. A duplicate value exists in _dlt_id because both records have the same surrogate key.

Note that:

• The composite key (_dlt_id, _dlt_valid_from) is unique.
• _dlt_id remains unique for nested tables—scd2 does not affect this.

Example: scd2 merge strategy

@dlt.resource(
    write_disposition={"disposition": "merge", "strategy": "scd2"}
)
def dim_customer():
    # initial load
    yield [
        {"customer_key": 1, "c1": "foo", "c2": 1},
        {"customer_key": 2, "c1": "bar", "c2": 2}
    ]

pipeline.run(dim_customer())  # first run — 2024-04-09 18:27:53.734235
...

dim_customer destination table after first run—inserted two records present in initial load and added validity columns:

_dlt_valid_from	_dlt_valid_to	customer_key	c1	c2
2024-04-09 18:27:53.734235	NULL	1	foo	1
2024-04-09 18:27:53.734235	NULL	2	bar	2

...
def dim_customer():
    # second load — record for customer_key 1 got updated
    yield [
        {"customer_key": 1, "c1": "foo_updated", "c2": 1},
        {"customer_key": 2, "c1": "bar", "c2": 2}
]

pipeline.run(dim_customer())  # second run — 2024-04-09 22:13:07.943703

dim_customer destination table after second run—inserted new record for customer_key 1 and retired old record by updating _dlt_valid_to:

_dlt_valid_from	_dlt_valid_to	customer_key	c1	c2
2024-04-09 18:27:53.734235	2024-04-09 22:13:07.943703	1	foo	1
2024-04-09 18:27:53.734235	NULL	2	bar	2
2024-04-09 22:13:07.943703	NULL	1	foo_updated	1

...
def dim_customer():
    # third load — record for customer_key 2 got deleted
    yield [
        {"customer_key": 1, "c1": "foo_updated", "c2": 1},
    ]

pipeline.run(dim_customer())  # third run — 2024-04-10 06:45:22.847403

dim_customer destination table after third run—retired deleted record by updating _dlt_valid_to:

_dlt_valid_from	_dlt_valid_to	customer_key	c1	c2
2024-04-09 18:27:53.734235	2024-04-09 22:13:07.943703	1	foo	1
2024-04-09 18:27:53.734235	2024-04-10 06:45:22.847403	2	bar	2
2024-04-09 22:13:07.943703	NULL	1	foo_updated	1

Example: incremental scd2

A merge_key can be provided to work with incremental extracts instead of full extracts. The merge_key lets you define which absent rows are considered "deleted". Compound natural keys are allowed and can be specified by providing a list of column names as merge_key.

Case 1: do not retire absent records

You can set the natural key as merge_key to prevent retirement of absent rows. In this case you don't consider any absent row deleted. Records are not retired in the destination if their corresponding natural keys are not present in the source extract. This allows for incremental extracts that only contain updated records.

@dlt.resource(
    merge_key="customer_key",
    write_disposition={"disposition": "merge", "strategy": "scd2"}
)
def dim_customer():
    # initial load
    yield [
        {"customer_key": 1, "c1": "foo", "c2": 1},
        {"customer_key": 2, "c1": "bar", "c2": 2}
    ]

pipeline.run(dim_customer())  # first run — 2024-04-09 18:27:53.734235
...

dim_customer destination table after first run:

_dlt_valid_from	_dlt_valid_to	customer_key	c1	c2
2024-04-09 18:27:53.734235	NULL	1	foo	1
2024-04-09 18:27:53.734235	NULL	2	bar	2

...
def dim_customer():
    # second load — record for customer_key 1 got updated, customer_key 2 absent
    yield [
        {"customer_key": 1, "c1": "foo_updated", "c2": 1},
]

pipeline.run(dim_customer())  # second run — 2024-04-09 22:13:07.943703

dim_customer destination table after second run—customer key 2 was not retired:

_dlt_valid_from	_dlt_valid_to	customer_key	c1	c2
2024-04-09 18:27:53.734235	2024-04-09 22:13:07.943703	1	foo	1
2024-04-09 18:27:53.734235	NULL	2	bar	2
2024-04-09 22:13:07.943703	NULL	1	foo_updated	1

Case 2: only retire records for given partitions

note

Technically this is not SCD2 because the key used to merge records is not a natural key.

You can set a "partition" column as merge_key to retire absent rows for given partitions. In this case you only consider absent rows deleted if their partition value is present in the extract. Physical partitioning of the table is not required—the word "partition" is used conceptually here.

@dlt.resource(
    merge_key="date",
    write_disposition={"disposition": "merge", "strategy": "scd2"}
)
def some_data():
    # load 1 — "2024-01-01" partition
    yield [
        {"date": "2024-01-01", "name": "a"},
        {"date": "2024-01-01", "name": "b"},
    ]

pipeline.run(some_data())  # first run — 2024-01-02 03:03:35.854305
...

some_data destination table after first run:

_dlt_valid_from	_dlt_valid_to	date	name
2024-01-02 03:03:35.854305	NULL	2024-01-01	a
2024-01-02 03:03:35.854305	NULL	2024-01-01	b

...
def some_data():
    # load 2 — "2024-01-02" partition
    yield [
        {"date": "2024-01-02", "name": "c"},
        {"date": "2024-01-02", "name": "d"},
    ]

pipeline.run(some_data())  # second run — 2024-01-03 03:01:11.943703
...

some_data destination table after second run—added 2024-01-02 records, did not touch 2024-01-01 records:

_dlt_valid_from	_dlt_valid_to	date	name
2024-01-02 03:03:35.854305	NULL	2024-01-01	a
2024-01-02 03:03:35.854305	NULL	2024-01-01	b
2024-01-03 03:01:11.943703	NULL	2024-01-02	c
2024-01-03 03:01:11.943703	NULL	2024-01-02	d

...
def some_data():
    # load 3 — reload "2024-01-01" partition
    yield [
        {"date": "2024-01-01", "name": "a"},  # unchanged
        {"date": "2024-01-01", "name": "bb"},  # new
    ]

pipeline.run(some_data())  # third run — 2024-01-03 10:30:05.750356
...

some_data destination table after third run—retired b, added bb, did not touch 2024-01-02 partition:

_dlt_valid_from	_dlt_valid_to	date	name
2024-01-02 03:03:35.854305	NULL	2024-01-01	a
2024-01-02 03:03:35.854305	2024-01-03 10:30:05.750356	2024-01-01	b
2024-01-03 03:01:11.943703	NULL	2024-01-02	c
2024-01-03 03:01:11.943703	NULL	2024-01-02	d
2024-01-03 10:30:05.750356	NULL	2024-01-01	bb

Example: configure validity column names

_dlt_valid_from and _dlt_valid_to are used by default as validity column names. Other names can be configured as follows:

@dlt.resource(
    write_disposition={
        "disposition": "merge",
        "strategy": "scd2",
        "validity_column_names": ["from", "to"],  # will use "from" and "to" instead of default values
    }
)
def dim_customer():
    ...
...

Example: configure active record timestamp

You can configure the literal used to indicate an active record with active_record_timestamp. The default literal NULL is used if active_record_timestamp is omitted or set to None. Provide a date value if you prefer to use a high timestamp instead.

@dlt.resource(
    write_disposition={
        "disposition": "merge",
        "strategy": "scd2",
        # accepts various types of date/datetime objects
        "active_record_timestamp": "9999-12-31",
    }
)
def dim_customer():
    ...

Example: configure boundary timestamp

You can configure the "boundary timestamp" used for record validity windows with boundary_timestamp. The provided date(time) value is used as "valid from" for new records and as "valid to" for retired records. The timestamp at which a load package is created is used if boundary_timestamp is omitted.

@dlt.resource(
    write_disposition={
        "disposition": "merge",
        "strategy": "scd2",
        # accepts various types of date/datetime objects
        "boundary_timestamp": "2024-08-21T12:15:00+00:00",
    }
)
def dim_customer():
    ...

Example: Use your own row hash

By default, dlt generates a row hash based on all columns provided by the resource and stores it in _dlt_id. You can use your own hash instead by specifying row_version_column_name in the write_disposition dictionary. You might already have a column present in your resource that can naturally serve as a row hash, in which case it's more efficient to use those pre-existing hash values than to generate new artificial ones. This option also allows you to use hashes based on a subset of columns, in case you want to ignore changes in some of the columns. When using your own hash, values for _dlt_id are randomly generated.

@dlt.resource(
    write_disposition={
        "disposition": "merge",
        "strategy": "scd2",
        "row_version_column_name": "row_hash",  # the column "row_hash" should be provided by the resource
    }
)
def dim_customer():
    ...
...

🧪 Use scd2 with Arrow tables and Panda frames

dlt will not add a row hash column to the tabular data automatically (we are working on it). You need to do that yourself by adding a transform function to the scd2 resource that computes row hashes (using pandas.util, should be fairly fast).

import dlt
from dlt.sources.helpers.transform import add_row_hash_to_table

scd2_r = dlt.resource(
          arrow_table,
          name="tabular",
          write_disposition={
              "disposition": "merge",
              "strategy": "scd2",
              "row_version_column_name": "row_hash",
          },
      ).add_map(add_row_hash_to_table("row_hash"))

add_row_hash_to_table is the name of the transform function that will compute and create the row_hash column that is declared as holding the hash by row_version_column_name.

tip

You can modify existing resources that yield data in tabular form by calling apply_hints and passing the scd2 config in write_disposition and then by adding the transform with add_map.

Nested tables

Nested tables, if any, do not contain validity columns. Validity columns are only added to the root table. Validity column values for records in nested tables can be obtained by joining the root table using _dlt_root_id (root_key).

Limitations

• You cannot use columns like updated_at or integer version of a record that are unique within a primary_key (even if it is defined). The hash column must be unique for a root table. We are working to allow updated_at style tracking.
• We do not detect changes in nested tables (except new records) if the row hash of the corresponding parent row does not change. Use updated_at or a similar column in the root table to stamp changes in nested data.
• merge_key(s) are (for now) ignored.

upsert strategy

caution

The upsert merge strategy is currently supported for these destinations:

• athena
• bigquery
• databricks
• mssql
• postgres
• snowflake
• filesystem with delta table format (see limitations here)

The upsert merge strategy does primary-key based upserts:

• update a record if the key exists in the target table
• insert a record if the key does not exist in the target table

You can delete records with the hard_delete hint.

upsert versus delete-insert

Unlike the default delete-insert merge strategy, the upsert strategy:

1. needs a primary_key
2. expects this primary_key to be unique (dlt does not deduplicate)
3. does not support merge_key
4. uses MERGE or UPDATE operations to process updates

Example: upsert merge strategy

@dlt.resource(
    write_disposition={"disposition": "merge", "strategy": "upsert"},
    primary_key="my_primary_key"
)
def my_upsert_resource():
    ...
...

Incremental loading with a cursor field

In most REST APIs (and other data sources, i.e., database tables), you can request new or updated data by passing a timestamp or ID of the "last" record to a query. The API/database returns just the new/updated records from which you take the maximum/minimum timestamp/ID for the next load.

To do incremental loading this way, we need to:

• Figure out which field is used to track changes (the so-called cursor field) (e.g., “inserted_at”, "updated_at”, etc.);
• Determine how to pass the "last" (maximum/minimum) value of the cursor field to an API to get just new or modified data (how we do this depends on the source API).

Once you've figured that out, dlt takes care of finding maximum/minimum cursor field values, removing duplicates, and managing the state with the last values of the cursor. Take a look at the GitHub example below, where we request recently created issues.

@dlt.resource(primary_key="id")
def repo_issues(
    access_token,
    repository,
    updated_at = dlt.sources.incremental("updated_at", initial_value="1970-01-01T00:00:00Z")
):
    # Get issues since "updated_at" stored in state on previous run (or initial_value on first run)
    for page in _get_issues_page(access_token, repository, since=updated_at.start_value):
        yield page
        # Last_value is updated after every page
        print(updated_at.last_value)

Here we add an updated_at argument that will receive incremental state, initialized to 1970-01-01T00:00:00Z. It is configured to track the updated_at field in issues yielded by the repo_issues resource. It will store the newest updated_at value in dlt state and make it available in updated_at.start_value on the next pipeline run. This value is inserted in the _get_issues_page function into the request query param since to the GitHub API.

In essence, the dlt.sources.incremental instance above:

• updated_at.initial_value which is always equal to "1970-01-01T00:00:00Z" passed in the constructor
• updated_at.start_value a maximum updated_at value from the previous run or the initial_value on the first run
• updated_at.last_value a "real-time" updated_at value updated with each yielded item or page. Before the first yield, it equals start_value
• updated_at.end_value (here not used) marking the end of the backfill range

When paginating, you probably need the start_value which does not change during the execution of the resource, however, most paginators will return a next page link which you should use.

Behind the scenes, dlt will deduplicate the results, i.e., in case the last issue is returned again (updated_at filter is inclusive) and skip already loaded ones.

In the example below, we incrementally load the GitHub events, where the API does not let us filter for the newest events - it always returns all of them. Nevertheless, dlt will load only the new items, filtering out all the duplicates and past issues.

# Use naming function in table name to generate separate tables for each event
@dlt.resource(primary_key="id", table_name=lambda i: i['type'])  # type: ignore
def repo_events(
    last_created_at = dlt.sources.incremental("created_at", initial_value="1970-01-01T00:00:00Z", last_value_func=max), row_order="desc"
) -> Iterator[TDataItems]:
    repos_path = "/repos/%s/%s/events" % (urllib.parse.quote(owner), urllib.parse.quote(name))
    for page in _get_rest_pages(access_token, repos_path + "?per_page=100"):
        yield page

We just yield all the events and dlt does the filtering (using the id column declared as primary_key).

GitHub returns events ordered from newest to oldest. So we declare the rows_order as descending to stop requesting more pages once the incremental value is out of range. We stop requesting more data from the API after finding the first event with created_at earlier than initial_value.

note

dlt.sources.incremental is implemented as a filter function that is executed after all other transforms you add with add_map or add_filter. This means that you can manipulate the data item before the incremental filter sees it. For example:

• You can create a surrogate primary key from other columns
• You can modify the cursor value or create a new field composed of other fields
• Dump Pydantic models to Python dicts to allow incremental to find custom values

Data validation with Pydantic happens before incremental filtering.

Max, min, or custom last_value_func

dlt.sources.incremental allows you to choose a function that orders (compares) cursor values to the current last_value.

• The default function is the built-in max, which returns the larger value of the two.
• Another built-in, min, returns the smaller value.

You can also pass your custom function. This lets you define last_value on nested types, i.e., dictionaries, and store indexes of last values, not just simple types. The last_value argument is a JSON Path and lets you select nested data (including the whole data item when $ is used). The example below creates a last value which is a dictionary holding a max created_at value for each created table name:

def by_event_type(event):
    last_value = None
    if len(event) == 1:
        item, = event
    else:
        item, last_value = event

    if last_value is None:
        last_value = {}
    else:
        last_value = dict(last_value)
    item_type = item["type"]
    last_value[item_type] = max(item["created_at"], last_value.get(item_type, "1970-01-01T00:00:00Z"))
    return last_value

@dlt.resource(primary_key="id", table_name=lambda i: i['type'])
def get_events(last_created_at = dlt.sources.incremental("$", last_value_func=by_event_type)):
    with open("tests/normalize/cases/github.events.load_page_1_duck.json", "r", encoding="utf-8") as f:
        yield json.load(f)

Using last_value_func for lookback

The example below uses the last_value_func to load data from the past month.

def lookback(event):
    last_value = None
    if len(event) == 1:
        item, = event
    else:
        item, last_value = event

    if last_value is None:
        last_value = {}
    else:
        last_value = dict(last_value)

    last_value["created_at"] = pendulum.from_timestamp(item["created_at"]).subtract(months=1)
    return last_value

@dlt.resource(primary_key="id")
def get_events(last_created_at = dlt.sources.incremental("created_at", last_value_func=lookback)):
    with open("tests/normalize/cases/github.events.load_page_1_duck.json", "r", encoding="utf-8") as f:
        yield json.load(f)

Using end_value for backfill

You can specify both initial and end dates when defining incremental loading. Let's go back to our Github example:

@dlt.resource(primary_key="id")
def repo_issues(
    access_token,
    repository,
    created_at=dlt.sources.incremental("created_at", initial_value="1970-01-01T00:00:00Z", end_value="2022-07-01T00:00:00Z")
):
    # get issues created from the last "created_at" value
    for page in _get_issues_page(access_token, repository, since=created_at.start_value, until=created_at.end_value):
        yield page

Above, we use the initial_value and end_value arguments of the incremental to define the range of issues that we want to retrieve and pass this range to the Github API (since and until). As in the examples above, dlt will make sure that only the issues from the defined range are returned.

Please note that when end_date is specified, dlt will not modify the existing incremental state. The backfill is stateless and:

1. You can run backfill and incremental load in parallel (i.e., in an Airflow DAG) in a single pipeline.
2. You can partition your backfill into several smaller chunks and run them in parallel as well.

To define specific ranges to load, you can simply override the incremental argument in the resource, for example:

july_issues = repo_issues(
    created_at=dlt.sources.incremental(
        initial_value='2022-07-01T00:00:00Z', end_value='2022-08-01T00:00:00Z'
    )
)
august_issues = repo_issues(
    created_at=dlt.sources.incremental(
        initial_value='2022-08-01T00:00:00Z', end_value='2022-09-01T00:00:00Z'
    )
)
...

Note that dlt's incremental filtering considers the ranges half-closed. initial_value is inclusive, end_value is exclusive, so chaining ranges like above works without overlaps.

Declare row order to not request unnecessary data

With the row_order argument set, dlt will stop retrieving data from the data source (e.g., GitHub API) if it detects that the values of the cursor field are out of the range of start and end values.

In particular:

• dlt stops processing when the resource yields any item with a cursor value equal to or greater than the end_value and row_order is set to asc. (end_value is not included)
• dlt stops processing when the resource yields any item with a cursor value lower than the last_value and row_order is set to desc. (last_value is included)

note

"higher" and "lower" here refer to when the default last_value_func is used (max()), when using min() "higher" and "lower" are inverted.

caution

If you use row_order, make sure that the data source returns ordered records (ascending / descending) on the cursor field, e.g., if an API returns results both higher and lower than the given end_value in no particular order, data reading stops and you'll miss the data items that were out of order.

Row order is most useful when:

1. The data source does not offer start/end filtering of results (e.g., there is no start_time/end_time query parameter or similar).
2. The source returns results ordered by the cursor field.

The GitHub events example is exactly such a case. The results are ordered on cursor value descending, but there's no way to tell the API to limit returned items to those created before a certain date. Without the row_order setting, we'd be getting all events, each time we extract the github_events resource.

In the same fashion, the row_order can be used to optimize backfill so we don't continue making unnecessary API requests after the end of the range is reached. For example:

@dlt.resource(primary_key="id")
def tickets(
    zendesk_client,
    updated_at=dlt.sources.incremental(
        "updated_at",
        initial_value="2023-01-01T00:00:00Z",
        end_value="2023-02-01T00:00:00Z",
        row_order="asc"
    ),
):
    for page in zendesk_client.get_pages(
        "/api/v2/incremental/tickets", "tickets", start_time=updated_at.start_value
    ):
        yield page

In this example, we're loading tickets from Zendesk. The Zendesk API yields items paginated and ordered from oldest to newest, but only offers a start_time parameter for filtering, so we cannot tell it to stop retrieving data at end_value. Instead, we set row_order to asc and dlt will stop getting more pages from the API after the first page with a cursor value updated_at is found older than end_value.

caution

In rare cases when you use Incremental with a transformer, dlt will not be able to automatically close the generator associated with a row that is out of range. You can still call the can_close() method on incremental and exit the yield loop when true.

tip

The dlt.sources.incremental instance provides start_out_of_range and end_out_of_range attributes which are set when the resource yields an element with a higher/lower cursor value than the initial or end values. If you do not want dlt to stop processing automatically and instead want to handle such events yourself, do not specify row_order:

@dlt.transformer(primary_key="id")
def tickets(
    zendesk_client,
    updated_at=dlt.sources.incremental(
        "updated_at",
        initial_value="2023-01-01T00:00:00Z",
        end_value="2023-02-01T00:00:00Z",
        row_order="asc"
    ),
):
    for page in zendesk_client.get_pages(
        "/api/v2/incremental/tickets", "tickets", start_time=updated_at.start_value
    ):
        yield page
        # Stop loading when we reach the end value
        if updated_at.end_out_of_range:
            return

Deduplicate overlapping ranges with primary key

Incremental does not deduplicate datasets like the merge write disposition does. However, it ensures that when another portion of data is extracted, records that were previously loaded won't be included again. dlt assumes that you load a range of data, where the lower bound is inclusive (i.e., greater than or equal). This ensures that you never lose any data but will also re-acquire some rows. For example, if you have a database table with a cursor field on updated_at which has a day resolution, then there's a high chance that after you extract data on a given day, more records will still be added. When you extract on the next day, you should reacquire data from the last day to ensure all records are present; however, this will create overlap with data from the previous extract.

By default, a content hash (a hash of the json representation of a row) will be used to deduplicate. This may be slow, so dlt.sources.incremental will inherit the primary key that is set on the resource. You can optionally set a primary_key that is used exclusively to deduplicate and which does not become a table hint. The same setting lets you disable the deduplication altogether when an empty tuple is passed. Below, we pass primary_key directly to incremental to disable deduplication. That overrides the delta primary_key set in the resource:

@dlt.resource(primary_key="delta")
# disable the unique value check by passing () as primary key to incremental
def some_data(last_timestamp=dlt.sources.incremental("item.ts", primary_key=())):
    for i in range(-10, 10):
        yield {"delta": i, "item": {"ts": pendulum.now().timestamp()}}

Using dlt.sources.incremental with dynamically created resources

When resources are created dynamically, it is possible to use the dlt.sources.incremental definition as well.

@dlt.source
def stripe():
    # declare a generator function
    def get_resource(
        endpoint: Endpoints,
        created: dlt.sources.incremental=dlt.sources.incremental("created")
    ):
        ...
        yield data

    # create resources for several endpoints on a single decorator function
    for endpoint in endpoints:
        yield dlt.resource(
            get_resource,
            name=endpoint.value,
            write_disposition="merge",
            primary_key="id"
        )(endpoint)

Please note that in the example above, get_resource is passed as a function to dlt.resource to which we bind the endpoint: dlt.resource(...)(endpoint).

caution

The typical mistake is to pass a generator (not a function) as below:

yield dlt.resource(get_resource(endpoint), name=endpoint.value, write_disposition="merge", primary_key="id").

Here we call get_resource(endpoint) and that creates an un-evaluated generator on which the resource is created. That prevents dlt from controlling the created argument during runtime and will result in an IncrementalUnboundError exception.

Using Airflow schedule for backfill and incremental loading

When running an Airflow task, you can opt-in your resource to get the initial_value/start_value and end_value from the Airflow schedule associated with your DAG. Let's assume that the Zendesk tickets resource contains a year of data with thousands of tickets. We want to backfill the last year of data week by week and then continue with incremental loading daily.

@dlt.resource(primary_key="id")
def tickets(
    zendesk_client,
    updated_at=dlt.sources.incremental[int](
        "updated_at",
        allow_external_schedulers=True
    ),
):
    for page in zendesk_client.get_pages(
        "/api/v2/incremental/tickets", "tickets", start_time=updated_at.start_value
    ):
        yield page

We opt-in to the Airflow scheduler by setting allow_external_schedulers to True:

1. When running on Airflow, the start and end values are controlled by Airflow and the dlt state is not used.
2. In all other environments, the incremental behaves as usual, maintaining the dlt state.

Let's generate a deployment with dlt deploy zendesk_pipeline.py airflow-composer and customize the DAG:

@dag(
    schedule_interval='@weekly',
    start_date=pendulum.datetime(2023, 2, 1),
    end_date=pendulum.datetime(2023, 8, 1),
    catchup=True,
    max_active_runs=1,
    default_args=default_task_args
)
def zendesk_backfill_bigquery():
    tasks = PipelineTasksGroup("zendesk_support_backfill", use_data_folder=False, wipe_local_data=True)

    # import zendesk like in the demo script
    from zendesk import zendesk_support

    pipeline = dlt.pipeline(
        pipeline_name="zendesk_support_backfill",
        dataset_name="zendesk_support_data",
        destination='bigquery',
    )
    # select only incremental endpoints in support api
    data = zendesk_support().with_resources("tickets", "ticket_events", "ticket_metric_events")
    # create the source, the "serialize" decompose option will convert dlt resources into Airflow tasks. use "none" to disable it
    tasks.add_run(pipeline, data, decompose="serialize", trigger_rule="all_done", retries=0, provide_context=True)


zendesk_backfill_bigquery()

What got customized:

1. We use a weekly schedule and want to get the data from February 2023 (start_date) until the end of July (end_date).
2. We make Airflow generate all weekly runs (catchup is True).
3. We create zendesk_support resources where we select only the incremental resources we want to backfill.

When you enable the DAG in Airflow, it will generate several runs and start executing them, starting in February and ending in August. Your resource will receive subsequent weekly intervals starting with 2023-02-12, 00:00:00 UTC to 2023-02-19, 00:00:00 UTC.

You can repurpose the DAG above to start loading new data incrementally after (or during) the backfill:

@dag(
    schedule_interval='@daily',
    start_date=pendulum.datetime(2023, 2, 1),
    catchup=False,
    max_active_runs=1,
    default_args=default_task_args
)
def zendesk_new_bigquery():
    tasks = PipelineTasksGroup("zendesk_support_new", use_data_folder=False, wipe_local_data=True)

    # import your source from pipeline script
    from zendesk import zendesk_support

    pipeline = dlt.pipeline(
        pipeline_name="zendesk_support_new",
        dataset_name="zendesk_support_data",
        destination='bigquery',
    )
    tasks.add_run(pipeline, zendesk_support(), decompose="serialize", trigger_rule="all_done", retries=0, provide_context=True)

Above, we switch to a daily schedule and disable catchup and end date. We also load all the support resources to the same dataset as backfill (zendesk_support_data). If you want to run this DAG parallel with the backfill DAG, change the pipeline name, for example, to zendesk_support_new as above.

Under the hood

Before dlt starts executing incremental resources, it looks for data_interval_start and data_interval_end Airflow task context variables. These are mapped to initial_value and end_value of the Incremental class:

1. dlt is smart enough to convert Airflow datetime to ISO strings or Unix timestamps if your resource is using them. In our example, we instantiate updated_at=dlt.sources.incremental[int], where we declare the last value type to be int. dlt can also infer the type if you provide the initial_value argument.
2. If data_interval_end is in the future or is None, dlt sets the end_value to now.
3. If data_interval_start == data_interval_end, we have a manually triggered DAG run. In that case, data_interval_end will also be set to now.

Manual runs

You can run DAGs manually, but you must remember to specify the Airflow logical date of the run in the past (use the Run with config option). For such a run, dlt will load all data from that past date until now. If you do not specify the past date, a run with a range (now, now) will happen, yielding no data.

Reading incremental loading parameters from configuration

Consider the example below for reading incremental loading parameters from "config.toml". We create a generate_incremental_records resource that yields "id", "idAfter", and "name". This resource retrieves cursor_path and initial_value from "config.toml".

1. In "config.toml", define the cursor_path and initial_value as:

   # Configuration snippet for an incremental resource
   [pipeline_with_incremental.sources.id_after]
   cursor_path = "idAfter"
   initial_value = 10

   cursor_path is assigned the value "idAfter" with an initial value of 10.

2. Here's how the generate_incremental_records resource uses the cursor_path defined in "config.toml":

   @dlt.resource(table_name="incremental_records")
   def generate_incremental_records(id_after: dlt.sources.incremental = dlt.config.value):
       for i in range(150):
           yield {"id": i, "idAfter": i, "name": "name-" + str(i)}
   
   pipeline = dlt.pipeline(
       pipeline_name="pipeline_with_incremental",
       destination="duckdb",
   )
   
   pipeline.run(generate_incremental_records)

   id_after incrementally stores the latest cursor_path value for future pipeline runs.

Loading when incremental cursor path is missing or value is None/NULL

You can customize the incremental processing of dlt by setting the parameter on_cursor_value_missing.

When loading incrementally with the default settings, there are two assumptions:

1. Each row contains the cursor path.
2. Each row is expected to contain a value at the cursor path that is not None.

For example, the two following source data will raise an error:

@dlt.resource
def some_data_without_cursor_path(updated_at=dlt.sources.incremental("updated_at")):
    yield [
        {"id": 1, "created_at": 1, "updated_at": 1},
        {"id": 2, "created_at": 2},  # cursor field is missing
    ]

list(some_data_without_cursor_path())

@dlt.resource
def some_data_without_cursor_value(updated_at=dlt.sources.incremental("updated_at")):
    yield [
        {"id": 1, "created_at": 1, "updated_at": 1},
        {"id": 3, "created_at": 4, "updated_at": None},  # value at cursor field is None
    ]

list(some_data_without_cursor_value())

To process a data set where some records do not include the incremental cursor path or where the values at the cursor path are None, there are the following four options:

1. Configure the incremental load to raise an exception in case there is a row where the cursor path is missing or has the value None using incremental(..., on_cursor_value_missing="raise"). This is the default behavior.
2. Configure the incremental load to tolerate the missing cursor path and None values using incremental(..., on_cursor_value_missing="include").
3. Configure the incremental load to exclude the missing cursor path and None values using incremental(..., on_cursor_value_missing="exclude").
4. Before the incremental processing begins: Ensure that the incremental field is present and transform the values at the incremental cursor to a value different from None. See docs below

Here is an example of including rows where the incremental cursor value is missing or None:

@dlt.resource
def some_data(updated_at=dlt.sources.incremental("updated_at", on_cursor_value_missing="include")):
    yield [
        {"id": 1, "created_at": 1, "updated_at": 1},
        {"id": 2, "created_at": 2},
        {"id": 3, "created_at": 4, "updated_at": None},
    ]

result = list(some_data())
assert len(result) == 3
assert result[1] == {"id": 2, "created_at": 2}
assert result[2] == {"id": 3, "created_at": 4, "updated_at": None}

If you do not want to import records without the cursor path or where the value at the cursor path is None, use the following incremental configuration:

@dlt.resource
def some_data(updated_at=dlt.sources.incremental("updated_at", on_cursor_value_missing="exclude")):
    yield [
        {"id": 1, "created_at": 1, "updated_at": 1},
        {"id": 2, "created_at": 2},
        {"id": 3, "created_at": 4, "updated_at": None},
    ]

result = list(some_data())
assert len(result) == 1

Transform records before incremental processing

If you want to load data that includes None values, you can transform the records before the incremental processing. You can add steps to the pipeline that filter, transform, or pivot your data.

caution

It is important to set the insert_at parameter of the add_map function to control the order of execution and ensure that your custom steps are executed before the incremental processing starts. In the following example, the step of data yielding is at index = 0, the custom transformation at index = 1, and the incremental processing at index = 2.

See below how you can modify rows before the incremental processing using add_map() and filter rows using add_filter().

@dlt.resource
def some_data(updated_at=dlt.sources.incremental("updated_at")):
    yield [
        {"id": 1, "created_at": 1, "updated_at": 1},
        {"id": 2, "created_at": 2, "updated_at": 2},
        {"id": 3, "created_at": 4, "updated_at": None},
    ]

def set_default_updated_at(record):
    if record.get("updated_at") is None:
        record["updated_at"] = record.get("created_at")
    return record

# Modifies records before the incremental processing
with_default_values = some_data().add_map(set_default_updated_at, insert_at=1)
result = list(with_default_values)
assert len(result) == 3
assert result[2]["updated_at"] == 4

# Removes records before the incremental processing
without_none = some_data().add_filter(lambda r: r.get("updated_at") is not None, insert_at=1)
result_filtered = list(without_none)
assert len(result_filtered) == 2

Doing a full refresh

You may force a full refresh of merge and append pipelines:

1. In the case of a merge, the data in the destination is deleted and loaded fresh. Currently, we do not deduplicate data during the full refresh.
2. In the case of dlt.sources.incremental, the data is deleted and loaded from scratch. The state of the incremental is reset to the initial value.

Example:

p = dlt.pipeline(destination="bigquery", dataset_name="dataset_name")
# Do a full refresh
p.run(merge_source(), write_disposition="replace")
# Do a full refresh of just one table
p.run(merge_source().with_resources("merge_table"), write_disposition="replace")
# Run a normal merge
p.run(merge_source())

Passing write disposition to replace will change the write disposition on all the resources in repo_events during the run of the pipeline.

Custom incremental loading with pipeline state

The pipeline state is a Python dictionary that gets committed atomically with the data; you can set values in it in your resources and on the next pipeline run, request them back.

The pipeline state is, in principle, scoped to the resource - all values of the state set by a resource are private and isolated from any other resource. You can also access the source-scoped state, which can be shared across resources. You can find more information on pipeline state here.

Preserving the last value in resource state

For the purpose of preserving the "last value" or similar loading checkpoints, we can open a dlt state dictionary with a key and a default value as below. When the resource is executed and the data is loaded, the yielded resource data will be loaded at the same time with the update to the state.

In the two examples below, you see how the dlt.sources.incremental is working under the hood.

@resource()
def tweets():
    # Get the last value from loaded metadata. If it does not exist, get None
    last_val = dlt.current.resource_state().setdefault("last_updated", None)
    # Get data and yield it
    data = get_data(start_from=last_val)
    yield data
    # Change the state to the new value
    dlt.current.resource_state()["last_updated"] = data["last_timestamp"]

If we keep a list or a dictionary in the state, we can modify the underlying values in the objects, and thus we do not need to set the state back explicitly.

@resource()
def tweets():
    # Get the last value from loaded metadata. If it does not exist, get None
    loaded_dates = dlt.current.resource_state().setdefault("days_loaded", [])
    # Do stuff: get data and add new values to the list
    # `loaded_date` is a reference to the `dlt.current.resource_state()["days_loaded"]` list
    # and thus modifying it modifies the state
    yield data
    loaded_dates.append('2023-01-01')

Step by step explanation of how to get or set the state:

1. We can use the function var = dlt.current.resource_state().setdefault("key", []). This allows us to retrieve the values of key. If key was not set yet, we will get the default value [] instead.
2. We can now treat var as a Python list - We can append new values to it, or if applicable, we can read the values from previous loads.
3. On pipeline run, the data will load, and the new var's value will get saved in the state. The state is stored at the destination, so it will be available on subsequent runs.

Advanced state usage: storing a list of processed entities

Let's look at the player_games resource from the chess pipeline. The chess API has a method to request games archives for a given month. The task is to prevent the user from loading the same month data twice - even if the user makes a mistake and requests the same months range again:

• Our data is requested in 2 steps:
  • Get all available archives URLs.
  • Get the data from each URL.
• We will add the "chess archives" URLs to this list we created.
• This will allow us to track what data we have loaded.
• When the data is loaded, the list of archives is loaded with it.
• Later we can read this list and know what data has already been loaded.

In the following example, we initialize a variable with an empty list as a default:

@dlt.resource(write_disposition="append")
def players_games(chess_url, players, start_month=None, end_month=None):
    loaded_archives_cache = dlt.current.resource_state().setdefault("archives", [])

    # As far as Python is concerned, this variable behaves like
    # loaded_archives_cache = state['archives'] or []
    # Afterwards, we can modify the list, and finally
    # when the data is loaded, the cache is updated with our loaded_archives_cache

    # Get archives for a given player
    archives = get_players_archives(chess_url, players)
    for url in archives:
        # If not in cache, yield the data and cache the URL
        if url not in loaded_archives_cache:
            # Add URL to cache and yield the associated data
            loaded_archives_cache.append(url)
            r = requests.get(url)
            r.raise_for_status()
            yield r.json().get("games", [])
        else:
            print(f"Skipping archive {url}")

Advanced state usage: tracking the last value for all search terms in Twitter API

@dlt.resource(write_disposition="append")
def search_tweets(twitter_bearer_token=dlt.secrets.value, search_terms=None, start_time=None, end_time=None, last_value=None):
    headers = _headers(twitter_bearer_token)
    for search_term in search_terms:
        # Make cache for each term
        last_value_cache = dlt.current.resource_state().setdefault(f"last_value_{search_term}", None)
        print(f'last_value_cache: {last_value_cache}')
        params = {...}
        url = "https://api.twitter.com/2/tweets/search/recent"
        response = _paginated_get(url, headers=headers, params=params)
        for page in response:
            page['search_term'] = search_term
            last_id = page.get('meta', {}).get('newest_id', 0)
            # Set it back - not needed if we
            dlt.current.resource_state()[f"last_value_{search_term}"] = max(last_value_cache or 0, int(last_id))
            # Print the value for each search term
            print(f'new_last_value_cache for term {search_term}: {last_value_cache}')

            yield page

Troubleshooting

If you see that the incremental loading is not working as expected and the incremental values are not modified between pipeline runs, check the following:

1. Make sure the destination, pipeline_name, and dataset_name are the same between pipeline runs.

2. Check if dev_mode is False in the pipeline configuration. Check if refresh for associated sources and resources is not enabled.

3. Check the logs for the Bind incremental on <resource_name> ... message. This message indicates that the incremental value was bound to the resource and shows the state of the incremental value.

4. After the pipeline run, check the state of the pipeline. You can do this by running the following command:

dlt pipeline -v <pipeline_name> info

For example, if your pipeline is defined as follows:

@dlt.resource
def my_resource(
    incremental_object = dlt.sources.incremental("some_key", initial_value=0),
):
    ...

pipeline = dlt.pipeline(
    pipeline_name="example_pipeline",
    destination="duckdb",
)

pipeline.run(my_resource)

You'll see the following output:

Attaching to pipeline <pipeline_name>
...

sources:
{
  "example": {
    "resources": {
      "my_resource": {
        "incremental": {
          "some_key": {
            "initial_value": 0,
            "last_value": 42,
            "unique_hashes": [
              "nmbInLyII4wDF5zpBovL"
            ]
          }
        }
      }
    }
  }
}

Verify that the last_value is updated between pipeline runs.